With a router, you can easily add unique personalization and details to your projects. You can craft and make items, such as wood joints, more precisely and faster than without using one. It’s a must-have tool if you want to save your time and effort. However, before you get one, make sure you have considered a few basic things about purchasing a woodworking router.

A Comfortable Router

An ideal router is the one that provides comfort. You are going to use this tool over time, so you surely don’t want any discomfort to distract you while working. A comfortable router is the one that has a perfect grip and weight, so you can easily control it. The control buttons should be also within your reach.

Which Type Do You Need?

If you want to use the outer to make basic joints or shape furniture edges, a fixed router should be enough for you. However, if you want to make internal cuts, instead of edges and basic joints, you should get yourself a plunge router. This type allows more precise control for this job than a fixed router. Besides, by moving the router bit up and down, it can enter the wood quite easily.

Should Your Buy a Well-built Router?

Router work is a complex and precise job. It is not something you can compensate with any flimsy bargain tool. You surely don’t want to waste your time fixing the tool all over the time just because it is the cheapest item in store. A sturdy, branded router is the least you need to avoid disturbing errors during your woodworking projects. In fact, this rule applies to every woodworking tool, not just a well-built router. A plunge routers, for example, even require better quality since it usually involves more moving parts than a well-built router.

Consider the Horsepower

Different routers come with a wide range of horsepower. Routers with small motors are usually enough if you want to make some internal grove cuts or shape edges. Routers with larger motors and higher horsepower are the least you should use to make woodworking joints. Power is crucial in woodworking joints because wood joints require larger router bits and there is a lot of wood you should remove in this project.

Solid Router Base

If possible, you should take your router and set it on a solid surface. Then, check the base to see if it can support the router well enough to prevent rocking. This is important because your router should stay level as you move it around. It should never tip over or it will only ruin your woodworking project. Some woodworkers manage to solve this problem by providing a heavy router base. This way, they can provide enough stability to their router and deliver perfect result to their woodworking project.

Adjusting the Tool

Check out your router control buttons and make sure you can easily adjust them to meet your needs. Those buttons should be also within your reach, so whenever you need them, you don’t need to move your hand so far just to reach it. The less time it takes to reach the button, the better you can focus on your woodworking project. On plunge routers, you may need to test drive the tool a few times before actually using it. This trick will help you to find out if you can control this tool smoothly. You should also find out how to switch the router bits.

Router Bits

When comparing different router models, you may need to write down the type and number of router bits from each router. If your favorite bits aren’t included, perhaps you need to buy these items separately. It can be expensive, depending on the type. If you are stuck with 2 different models with similar power and price, you can refer to the number of bits to make your decision. Please be careful with inexpensive routers that include different number of bits. Some manufacturers sacrifice the quality to cut the price. This is absolutely something you don’t want for your woodworking project. As I said before, your woodworking project is a delicate job, something you can’t easily compensate with any, less-quality tool.